Charnwood B300 12'' Premium Woodworking Bandsaw

Regular price

Brand: Charnwood

Features:

  • Powerful 1hp Induction Motor
  • Quick Release Bandsaw Blade Tensioner
  • Handle To Set The Table Angle
  • Bigger Cast Iron Work Table
  • Heavy Duty Bearing Bandsaw Blade Guides

Publisher: Charnwood

Details: A floorstanding woodworking bandsaw with a cutting capacity of 150mm (6"), big enough for most workshops. The power is delivered by a quiet induction motor with a belt drive to the bandsaw wheel. A two speed pulley allows the correct blade speed to be selected, depending on the hardness of the material being cut. The key to straight and accurate cutting on a bandsaw is to have a good set of blade guides. The B300 has three sealed bearings on the blade guard. Two mounted side-on to the blade to control blade twist and keep it true. The rear bearing takes the thrust of the back of the blade allowing it to run freely. The same set up is then repeated beneath the table The cast iron table tilts from 90 degrees to 45 degrees, on a rack & pinion, and has a positive stop at both of those positions. Any angle in between can be read off the scale and locked in. For rip cuts the guide fence can be situated on either side of the blade, can be locked into position with a single press of the lever and has a clear marker to set against the metric scale. The bandsaw is fitted with an LED work light on a flexible stem, so that the work area will always be well lit. This Bandsaw is fitted with a High Quality, British manufactured blade with precision ground teeth Specification Maximum cutting depth 165mm (6") Throat width 305mm (12") Table size 480mm x 390mmTable Height 1000mmTable tilt 0-45Cutting speed 800 & 370m/min Motor (induction) 1hp Blade length 2240mm Blade widths 1/4" - 3/4" Dimensions (WxDxH) 790mm x 580mm x 1600mm Weight 67Kg Warranty 1 Year